GLP Tech News 2019/07/16

GLP Tech News 2019/07/16
Open in Browser

Tech News - 2019/07/16

Dear ,
please find important technical information for fixture software update as below.

GLP delivers KNV Cube and KNV Arc from now on with the below software:

KNV Cube V14.9
KNV Arc V14.9

Main changes from Version 14.8 to Version 14.9


  • ¬†Improved: dimming of white LEDs in the lower end
  • Added: ArtSync for Artnet


  • Solved: Priority Issues in Mode 2
  • Solved:¬†KNV Arc display rotation arrow icon was 180¬į off


  • Update with D3Prog, only, Version 38 or higher / PC software Version 605 or higher¬†
  • Change filetype to Bin before you open the file with the PC software.
  • Make sure that KNV protocol Mode is set to DMX before the update! Update via Artnet and sACN is not supported.
  • Fixtures can be updated daisy chain via RS485/DMX.¬†Please make sure that no other DMX receivers or consoles are active on the line.


Update includes the following Show critical changes:
DMX Mode 2  Effect Engine Priority is corrected and therefore may behave different 



KNV CA Firmware V14.9 Rev.20190715 (  zip | 214.06 KB)


Copyright © 2023 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

Don¬īt want to get our news anymore? - Unsubscribe