GLP Tech News 2019/05/22

GLP Tech News 2019/05/22
Open in Browser

Tech News - 2019/05/22

Dear ,
please find important technical information for fixture software update as below.

GLP delivers impression S350 and impression E350 from now on with the below software:

impression S350  V50/46/32/27  ( Main/ Effect/ LED/ Network)
impression E350  V50/46/32/27  ( Main/ Effect/ LED/ Network)

Main changes from 48/46/32/25 to 50/46/32/27


  • ¬†None¬†


  • Solved: In some circumstances fixtures parameters react with delay.
  • Solved: The optional CRMX caused problems with too much data traffic and therefore fixtures resets¬† from time to time, randomly


Main and Network driver can be updated in sequence (D2Prog Version 38 or higher).

Or in one single file (D3Prog, Version 38 or higher).

When importing the hex files into a DProg (version 38 or higher) please make sure that you choose the file type Intel standard file (Hex- file) before uploading the files to the programmer.
Fixtures can be updated daisy chain via RS485/DMX. Please make sure that no other DMX receivers or consoles are active on the line.


impression S350 Firmware V50 Rev.20190522 (  zip | 740.53 KB)
impression E350 Firmware V50 Rev.20190522 (  zip | 748.57 KB)

Copyright © 2024 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

Don¬īt want to get our news anymore? - Unsubscribe