GLP Tech News 2019/01/14

GLP Tech News 2019/01/14
Open in Browser

Tech News 2019/01/14

Dear ,

From now on GLP delivers JDC1 and S350 / E350 with the below software:

JDC1 - V1.75/68/19 (Main/ LED/ Tilt)
S350 / E350 ‚Äď V39/41/27 ( Main/ Effects/ LED)

 

JDC-1 

Main changes from 1.71/68/18 to 1.75/68/19

FEATURES 

  • ¬†RDM: ¬†added: get serial number via RDM;¬† set Tilt reset disable/enable via RDM; ¬†set Tilt power On/Off via RDM¬†

BUG FIXES 

  • ¬†Minor RDM issues solved
  • Position Feedback : In some circumstances Position Feedback was not working¬†

UPDATE PROCESS 

All 2 driver files (main V1.75 and tilt V19) have to be updated in sequence.
When importing the 2 bin files to a D3Prog make sure that you choose the file type BIN before uploading the files to the programmer.
Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line

DOWNLOAD

JDC1 Firmware V175-68-19 (  zip | 93.98 KB)

 
 

impression S350 

Main changes from 28/40/27 to 39/41/27


FEATURES 

  • Manual Control added
  • Capture Manual DMX Settings and use as Stand-alone or instead DMX Hold¬†

BUG FIXES

  • ¬†Color/Gobo Shortway: In some circumstances C/G shortway was not working correctly
  • Movement disabled during working in the display menu improved. Movement will restart with 3s delay after returning back to DMX address. ¬†¬†¬†

UPDATE PROCESS

Main and Effect driver have to be updated in sequence.
When importing the 2 hex files to a d3prog please make sure that you choose the file type Intel standard file ( Hex- file) before uploading the files to the programmer.
Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line 

DOWNLOAD

impression S350 Firmware V39-41-27 (  zip | 223.43 KB)
 
 

impression E350 

Main changes from 28/40/27 to 39/41/27


FEATURES 

  • Manual Control added
  • Capture Manual DMX Settings and use as Stand-alone or instead DMX Hold¬†

BUG FIXES

  • ¬†Color/Gobo Shortway: In some circumstances C/G shortway was not working correctly
  • Movement disabled during working in the display menu improved. Movement will restart with 3s delay after returning back to DMX address. ¬†¬†¬†

UPDATE PROCESS

Main and Effect driver have to be updated in sequence.
When importing the 2 hex files to a d3prog please make sure that you choose the file type Intel standard file ( Hex- file) before uploading the files to the programmer.
Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line 

DOWNLOAD

impression E350 Firmware V39-41-27 (  zip | 218.32 KB)
 
 

Copyright © 2023 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

Don¬īt want to get our news anymore? - Unsubscribe