Tech News 2022/11/31 [impression FR1]

Tech News 2022/11/31 [impression FR1]
Open in Browser


Tech News - 2022/11/31

Dear ,

Please find important technical information below.

Many thanks in advance for your kind attention.

impression FR1

Main changes from V124-14-17  to V132                                   


  • Added support for new driver ICs


  • None


All fixtures below V130 have to be updated with 2 files in sequence.

1. Bootloader:  FR_1_Main_Up_Bl_V3.bin
2. Main application: FR1 Main DMX V132.bin

The update should be done daisy chain via DMX/RS485 with D3Prog Version 42 or higher.
When importing the bin files into a D3Prog please make sure that you choose the file type BIN before uploading the file to the programmer.

After uploading the first file (the bootloader) the fixtures display will keep flashing, showing the fixture is waiting for the  main application


V124 is stable. However we do recommend all fixtures to update to V132, in order to be prepared for future updates.


  • FR1 Main DMX V132.bin
  • FR_1_Main_Up_Bl_V3.bin


GLP impression FR1 Firmware V132 Rev20221025-1 (zip | 623.31 KB)

Copyright © 2024 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

You no longer want to receive our news? - Unsubscribe