GLP Tech News 2022/07/22 [impression FR10 Bar, HIGHLANDER, JDC Line]

GLP Tech News 2022/07/22 [impression FR10 Bar, HIGHLANDER, JDC Line]
Open in Browser

 

Tech News - 2022/07/22


Dear ,

Please find important technical information below.

Many thanks in advance for your kind attention.

HIGHLANDER Firmware Update [Important!]

Main changes from V46 to V47

FEATURES 

  • no new Featres added

BUG FIXES 

  • Fixed: Fixtures loosing calibration data in very seldom circumstances

UPDATE PROCESS

  • 1 file has to be updated via DMX/RS485:
    Highlander_V47_DMX.bin
  • When importing the bin file to a D3Prog make sure that you choose the file type BIN before uploading the file to the programmer.

INFO

This update is highly recommended because it solves a very rare bug where the fixtures calibration data is being lost.

DOWNLOAD

GLP Highlander Wash Firmware V47 Rev20220721-1 (zip | 537.73 KB)


impression FR10 Firmware Update 

Main changes from V33 to V46

FEATURES 

  • Added: Subfixture Mode:  Normal (default) or Independent. Set via DMX and Display Menu. When Independent the dimmer of the main module has no effect of the output of the sub modules (V34)
  • Added: RDM PID: Art-Net Universe and sACN universe
  • Added: RDM PID: Save fixture settings
  • Modified: RDM Discovery

BUG FIXES 

  • Resolved: Dimmer Bug in Mode4. No output when dimmer curve is set to soft and color mix priority is set to Mix (V34)
  • Resolved:  Bug in Subfixture Mode Independent, submodule was not independent (V36)UPDATE PROCESS

UPDATE PROCESS

  • Update with D3Prog, only, Version 42 or higher / PC software Version 605 or higher, daisy chain via RS485/DMX
  • Change filetype to Bin before you load the file with the PC software and make sure fixtures are running in DMX Mode.
  • Make sure no other DMX controllers or responders are active.

INFO

The update is show critical as some bugs were solved affecting the fixtures output.

DOWNLOAD

GLP impression FR10 Bar Firmware V46 Rev20220721-1 (zip | 463.3 KB)


JDC-Line Firmware Update

Main changes from V0.6.7 to V0.6.9

FEATURES 

  • Added: Subfixture Mode:  Normal (default) or Independent. Set via DMX and Display Menu. When Independent the dimmer of the main module has no effect of the output of the sub modules (V34)
  • Added: RDM PID: Art-Net Universe and sACN universe
  • Added: RDM PID: Save fixture settings
  • Modified: RDM Discovery

BUG FIXES 

  • Resolved: Dimmer Bug in Mode4. No output when dimmer curve is set to soft and color mix priority is set to Mix (V34)
  • Resolved:  Bug in Subfixture Mode Independent, submodule was not independent (V36)

UPDATE PROCESS

  • Update with D3Prog, only, Version 42 or higher / PC software Version 605 or higher, daisy chain via RS485/DMX
  • Change filetype to Bin before you load the file with the PC software and make sure fixtures are running in DMX Mode.
  • Make sure no other DMX controllers or responders are active.

INFO

The update is show critical as some bugs were solved affecting the fixtures output.

DOWNLOAD

GLP JDC Line 500 1000 Firmware V0-6-9 Rev20220722-1 (zip | 686.82 KB)

Copyright © 2022 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

You no longer want to receive our news? - Unsubscribe