Firmware Update for JDC Line 500 / 1000 V0.6.7

Main changes from V0.6.6 to V0.6.7

FEATURES 

• No new Feature added

BUG FIXES 

• Fixed: Changeing DMX Modes sometimes does not apply the correct DMX Mode and channel amount

UPDATE PROCESS 

One file has to be uploaded via DMX/RS485:

1. Upload:  JDC-Line_0.6.7_DMX.bin -  Via D2PROG or D3PROG

When importing the bin file to a DProg make sure that you choose the file type „BIN“ before uploading the file to the programmer.

The fixtures can be updated daisy chain via DMX/RS485. Please make sure that no other DMX receivers or consoles are active on the line and fixtures Control Protocol is set to DMX.

Download

GLP JDCLine 500-1000 Firmware V0-6-7 Rev20220316-1 (zip | 943.05 KB)

Info

Take care that you don´t lose power or connection during the update. So we don’t suggest this update while on production!

Please make sure that your DProg is at least on V42 and your transfer software programmer app on version 612.

If your JDCLine fixtures are below version 0.6.6 the bootloader has to be updated as well. Please see and follow upload instructions for version 0.6.6.