GLP Tech News 2022/03/08 [JDC1]

GLP Tech News 2022/03/08 [JDC1]
Open in Browser

 

Tech News - 2022/03/08


Dear ,

Please find important technical information for fixture software update as below.

Many thanks for your kind attention in advance.

GLP delivers the JDC1 from now on with version V1.90

Main changes from 1.78/69/19 to V1.90

FEATURES 

  • Implemented new bootloader type: V4
  • All PCB drivers will come from now on in 1 single file.
  • No need to update different PCBs separately, anymore.

THEREFORE THIS IS A MANDATORY UPDATE

BUG FIXES 

  • Default fixture settings via RDM was not working correctly
  • Factory Settings via RDM was not working correctly
  • Fixture timer was not working correctly.
  • Changed Reset Timings

UPDATE PROCESS 

2 files have to be updated in sequence via DMX/RS485:

1. JDC-1_Main_UpData_BlV3_V4.bin   (via D2PROG or D3PROG)

Repower the fixture when requested to. After repower the fixture will start with a flashing display, indicating awaiting the main application

2.  JDC-1 Main DMX V190_F1_70_20_F4_70_22.bin (via D2PROG or   D3PROG)

When importing the 2 bin files to a DProg make sure that you choose the file type BIN before uploading the files to the programmer.

Fixtures can be updated daisy chain via DMXPlease make sure that no other DMX receivers or consoles are active on the line

Download

Info

Update is show critical. Take care that you don´t lose power or connection during the update. So we don’t suggest this update on site.

Please take care with the new RDM commands. Factory Defaults will set back DMX start address and DMX Mode back to defaults!

Copyright © 2022 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

You no longer want to receive our news? - Unsubscribe