GLP delivers KNV Dot/Line PSU from now on with version 38
Main changes from version 34 to version 38
- Fixed: Delay on Dimmer when control protocol is Art-Net or sACN
- Fixed: Delay on Dimmer when control protocol is DMX
- Fixed: Display freezing
- Fixed: fixtures lose settings
Update can be done with D3Prog Version 38 or higher.
When importing the bin file into a D3Prog (version 38 or higher) please make sure that you choose the file type BIN before uploading the files to the programmer.
Fixtures can be updated daisy chain via RS485/DMX. Please make sure that no other DMX receivers or consoles are active on the line.
After updating the PSU all connected Dot or Lines should be updated as well. This can be started from the menu > service > advanced > fixture upgrade > upgrade all.
GLP KNV Dot Line PSU Firmware V38 Rev20210823-1 (zip | 315.72 KB)
INFO / Warning
Major Update – This update is strongly recommended because fixing the delay issues.
Update is show critical!
All Dots and Lines have to be updated as well, for this the PSU checks all connected fixtures automatically and will show UPDATE if needed.
This can be started from the menu > service > advanced > fixture upgrade > upgrade all.