impression S350 Wash

The impression S350 Wash from GLP brings a new level of control and functionality to the mid-range LED wash light market. At its core, the impression S350 Wash utilizes GLP’s class leading white light LED engine, also used in its spot counterpart, the S350, and features a CRI of more than 90, with TM-30 and CQS measurements of 95+ for superior color rendering at its native 6,000 K color temperature.The S350 Wash uses a Fresnel based optical system with zoom optics that give a range from 8 to 50 degrees for the broadest range of flexibility. Any angle within the zoom range, users have access to a full 4 blade curtain framing system, where each framing blade can cross the entire beam independently for a full blackout. Combined together, any combination of the blades – including the ability to rotate the entire assembly through 90 degrees – allows you to focus the output onto precise and accurate areas of the performance area, with complete accuracy when returning time after time. For further beam control, a high speed iris is also included for additional options and effects.

The color engine of the S350 Wash is the same as its spot partner allowing full color matching and variable color temperature control for seamless blending. A wide pallet of colors is achieved through a dichroic CMY system that is then supported by a fixed color wheel containing 10 slots, plus its open position. This is then complemented with a variable color temperature control system that allows a full range from 2,500K to 8,000K to be achieved on either, or both, of the color systems.

Technical data

hiddenfields

Referenced Tag-ID
37

Lightsource

Typ
  • White light LED-Engine
Light Source Power
  • 350 W
Light Source Lifetime
  • 20,000 h
CCT
  • 6,000 K
CRI (Ra)
90+
CQS
85+
TLCI
85+
TM-30 Rf
85+
TM-30 Rg
95+

Optical system

minimum Zoom (Deg)
  • 6° half peak (50%)
maximum Zoom (Deg.)
  • 68° cutoff angle (3%)
Zoom Ratio
1:5
Focus
  • motorized
  • 2m – infinite
Output
7,300 – 10,300 lm
Focus tracking
  • off, near, medium, far
Output Lens Diameter
185 mm / 7.3 in

Effects

Iris
  • 100% – 0%
Color wheel
  • 10 dichroic color filters + open
Color mixing
  • CMY color mixing
  • variable 0 – 100 %
Framing Module
  • 4 separately movable shutters
  • rotatable module +/- 45°
Color temperature control
  • 8,000 – 2,500 K
Pan
  • 565°
Tilt
  • 256°

Control

Protocol
  • Art-Net
  • DMX (USITT DMX512-A)
  • RDM (ANSI/ESTA E1.20)
  • sACN
  • CRMX (Lumenradio)
DMX channels
27
Control Modes
1
High-Res Channels
  • Dimming
  • Pan
  • Tilt
Dimming Curves
  • linear
  • soft
Performance Modes
  • fast
  • medium
  • smooth
Fan Modes
  • regulated
  • high
  • medium
  • low
Framing Control Modes
P/I, L/R
Setting and addressing
  • control panel with backlit monochrome graphic display
  • Jog Dial Navigation
  • DMX
  • RDM

Connectors

Signal connection
  • XLR 5-Pin
  • XLR 3-Pin
  • etherCON
Power input
  • Neutrik powerCON TRUE1
  • In

Mounting Options

Mounting
  • 2 pair of 1/4-turn locks
  • M10 Screw Thread(s)
  • eyelets for safety cable
Orientation
  • any
min. distance to combustible materials
  • 0.2 m / 8 in
min. distance to illuminated surfaces
  • 2.0 m / 6.6 ft
Location
  • dry

Dimensions & Weight

Height (head vertical)
642 mm / 25.3 in
Width (across yoke)
471 mm / 18.5 in
Width (head)
474 mm / 18.8 in
Length
650 mm / 25.6 in
Min. center-to-center
600 mm / 23.6 in
Weight
25.5 kg / 56 lbs

Electrical Specifications

Power input
  • 100 – 240 VAC / 50 – 60Hz
Power supply
  • auto-ranging electronic switch-mode
Fuse
  • T15A 250 V 6x32mm
Power supply cable
  • US: 16 A, 14 AWG, UL listed, E304117, SJT, 4.9 ft
  • EU: 16 A, 1.5 mm2, H05VV-F, 1.5 m
max. power (@230V)
550 W
typ. Leistung (@ 230V)
500 W
min. power (@230 V)
80 W
EEC
  • B
EEI
0.58
Ec (kWh/1,000h)
461.0
Leistungsfaktor (bei Voll-Last)
> 0.986 / 220 V AC
> 0.999 / 110 V AC

Thermal Specifications

Cooling
  • temperature controlled, overheating protection
max. surface temperature (Ta = 40°C)
55°C / 131 °F
max. ambient temperature (Ta max.)
45°C / 115°F
min. ambient temperature (Ta min.)
5°C / 40°F
Total heat dissipation
1878 BTU‘s /Hr

Construction

Housing Color
  • Black
Housing Material
  • high-impact flame-retardand thermoplastic
  • Aluminum
  • steel metal plates
Protection Rating
  • IP 20
Construction Features
  • baseless design
  • Tilt-Lock-System
  • modular slide in system
  • service friendly light source change

Approvals and Classification

EN 62471
  • Risk Group 2
No responsibility taken for misprints, errors and technical changes. Technical drawings and product depictions are representative only and can vary from the original items.
Technical data is subject to change without notice as a result of product modification. Subject to our general terms and conditions.
GLP German Light Products GmbH, Industriestrasse 3, 76307 Karlsbad, Germany, Managing Director: Udo Künzler, Registration Number: HRB 361719, Value Added Tax ID: DE 811 659 325