GLP Tech News 2019/03/22

GLP Tech News 2019/03/22
Open in Browser

Tech News 2019/03/22

Dear ,

please find important technical information for fixture software update as below.

From now GLP delivers impression S350 and impression E350 with the below software:

impression S350  V46/41/32/25  ( Main/ Effect/ LED/ Network)
impression E350  V46/41/32/25  ( Main/ Effect/ LED/ Network)
 

Impression S350/ impression E350

Main changes from 39/41/27 to 46/41/32/25

FEATURES 

  •  Artnet / sACN implemented
  • Serial Number Custom PID implemented for RDM

BUG FIXES 

  • Solved: Prism jumping out of its position this and then
  • Solved: LED flickering in the very low dimmer range
  • Solved: Speed mode fast was active for all effects – must have an effect on Pan/Tilt, only

IMPORTANT INFO

This is a major update and show critical because focus and zoom settings will be affected and changed!
 
This update is strongly recommended to use the fixtures in cross rental.
 
This software may only be installed on devices with the latest hardware version (latest Optical Lens System). If you are not sure if your device meets the latest hardware version, contact GLP Service. 
 

UPDATE PROCESS 

This Firmware can be updated by using the new D3Prog with Firmware 36 or higher as single update – and all drivers coming in one single hex file.
All File-Slots of the D3porg needs to be erased  before uploading the single hex file package on the DProg V36 or ff.
 
Update in sequence – one firmware driver file after the other - can be done with D3Prog Version 31 and ff.
 
When importing hex files to a d3prog make sure that you choose the correct file type : intel standard file (Hex file) before uploading the files to the programmer
Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line. 

DOWNLOAD

impression S350 Firmware V46-41-32-25 (  zip | 949.68 KB)
impression E350 Firmware V46-41-32-25 (  zip | 942.46 KB)
 
 

impression S350 

Main changes from 28/40/27 to 39/41/27


FEATURES 

  • Manual Control added
  • Capture Manual DMX Settings and use as Stand-alone or instead DMX Hold 

BUG FIXES

  •  Color/Gobo Shortway: In some circumstances C/G shortway was not working correctly
  • Movement disabled during working in the display menu improved. Movement will restart with 3s delay after returning back to DMX address.    

UPDATE PROCESS

Main and Effect driver have to be updated in sequence.
When importing the 2 hex files to a d3prog please make sure that you choose the file type Intel standard file ( Hex- file) before uploading the files to the programmer.
Fixtures can be updated daisy chain via DMX. Please make sure that no other DMX receivers or consoles are active on the line 

DOWNLOAD

impression S350 Firmware V39-41-27 (  zip | 223.43 KB)
 
 

Copyright © 2024 GLP German Light Products GmbH, All rights reserved. You are receiving this newsletter because you have either ordered it on the website or have a business relationship with GLP (or both).

Don´t want to get our news anymore? - Unsubscribe